English

FS May 2022 Product Updates

Updated on Jun 11, 2022 by
1.8k

Welcome back to FS Monthly Products Update! In May, we released some new products - 400G/800G transceivers, 10G/25G dual-rate industrial transceivers, 40G/100G Infiniband transceivers, Transponder & Muxponder, S5810 & S2805S Series Switches, rack servers, etc. Please keep reading about what's new.

 

FS Rack Servers for Small and Medium-sized Network

FS launched nine rack servers, which are mainly used in virtualization, cloud computing, Software-defined Storage (SDS), High-performance Computing (HPC), 5G/telecom, and small and medium-sized networks.

Additionally, FS also released network packet brokers for data centers and enterprise networks, including T8550-32C and T5850-24S2C, supporting 1G/10G/25G/40G/100G Networks in 1U 19" RU and L2~L4 traffic aggregation, filtering, replication and load balancing.

Rack Servers

800G Transceivers for Hyperscale Data Centers and Cloud Architecture

In May, FS released five more 800G OSFP and QSFP-DD transceivers, supporting up to 2km/10km link lengths over SMF. All of them are equipped with a Built-in Broadcom 7nm DSP Chip and have pretty low power consumption, saving energy and reducing heat dissipation to a greater extent. Besides, these 800G transceivers are hot-pluggable OSFP MSA or QSFP-DD MSA compliant and support 2x400G and 8x100G Breakout for Higher Port Density, which are suitable for hyperscale data centers and cloud architecture

800G Transceivers

400G OSFP Transceiver for Up to 10km Link Length

FS newly launched 400G OSFP LR8 transceiver has a Built-in Broadcom DSP Chip with a maximum power consumption of 14W. It is tested in targeted switches to ensure excellent performance, quality, and reliability. What's more, the 400G module also supports link lengths of up to 10km over SMF with duplex LC connector, which is an effective solution for 400G to 400G direct connection.

 

200G/400G Transponder & Muxponder & MUX Demux for Large Capacity DCI Network

In order to enrich our Transponder&Muxponder categories and better meet customer needs, FS launched a variety of new optical transmission products, mainly including Transponder/Muxponder MXP200G-204, MXP400G-14E, MXP400G-202, and DWDM Mux/Demux VMU48EC, ODU48EC, and OMD08. They are designed for building high-capacity optical transport networks and also provide ideal solutions for enterprise, data center, campus, and metro networks.

 

FS New Updates Switches for Flexible Deployment in Multiple Scenarios

In May, FS also enriched the switch product family and launched a series of switches, such as S3410-24TF-P, S3910-48TF, S5500-48T6SP-R, etc. Besides, FS newly released S5810 series switches, including S5810-28TS and S5810-48TS, which support up to 8 units stacking, greatly simplifying management.

In addition, FS also released two S2805S series switches with PoE ports, which are S2805S-8TF-P and S2805S-8TF. The S2805S series switches enable non-noise working environment due to fanless design. What's more, the featured L2 switch with simple Web GUI management makes S2805S series switches a perfect solution for enterprise networks.

FS Switches

New Updates on N-Series Switches IP Infusion™ OcNOS Software

The N-Series switches, namely N5850-48S6Q, N8550-48B8C, and N8550-32C, support IP Infusion™ OcNOS software and can be purchased for 1 or 3 or 5 years, which are ideal for medium and large data centers and large enterprise networks.

 

Indoor & Outdoor Wireless AP & AC Solution

To better meet the requirements of customers and improve user experience, FS launched two indoor wireless APs: AP-N303 and AP-N505. Besides, FS also released two outdoor wireless access points and a wireless controller. Please check the details below.

Outdoor Wireless Access Points

FS newly released AP-T565 and AP-T567 support seamless roaming with wireless controller. Besides, they have a built-in directional antenna and can be managed via FS controller or standalone. In most cases, they are used in large open areas like stadiums and parking lots. They can also withstand harsh environments such as extreme temperatures and long-term humidity, thus significantly reducing installation and maintenance.

Wireless Controller

FS AC-7072 wireless controller is suitable for any Layer 2 or Layer 3 network structure deployment and supports fair distribution of bandwidth among all clients to ensure load balancing. Besides, it can also protect data from online threats and improve data encryption capabilities, which is a professional device for large enterprises and campuses.

Wireless AP & AC

Transceivers/DAC/AOC for 10G/25G/40G/100G/200G Networks

FS also released a series of transceivers and DACs with low power consumption and insertion loss, high performance, and cost-effective connectivity solutions. Please check our new transceiver modules and DACs and AOCs in the lists below.

Transceiver Module Power Consumption Max Data Rate Connector Wavelengths Operating Temperature
Cisco SFP-10/25G-CSR-S ≤1W 25Gbps Duplex LC 850nm 0 to 70°C (commercial)
Cisco SFP-10/25G-BXU-I ≤1.5 W 25.78Gbps Simplex LC 1270nm-TX/1330nm-RX -40 to 85°C (industrial)
40GBASE-LR4 QSFP+ ≤3.5W 41.25Gbps Duplex LC 1310nm 0 to 70°C (commercial)
40GBASE-SR4 QSFP+ ≤1.5W 41.25Gbps MTP/MPO-12 850nm 0 to 70°C (commercial)
100GBASE-LR4 QSFP28 ≤3.5W 103.125Gbps Duplex LC 1310nm 0 to 70°C (commercial)
100GBASE-SR4 QSFP28 ≤2.5W 103.125Gbps MTP/MPO-12 850nm 0 to 70°C (commercial)
100GBASE-CWDM4 QSFP28 ≤3.5W 103.125Gbps Duplex LC 1271nm/1291nm/1311nm/1331nm 0 to 70°C (commercial)
100GBASE-PSM4 QSFP28 ≤3.5W 103.125Gbps MTP/MPO-12 1310nm 0 to 70°C (commercial)
DAC Power Consumption Max Data Rate Wire AWG Jacket Material Operating Temperature
40G QSFP+ to 4x10G SFP+ DAC ≤1.8W 40Gbps 30AWG PVC (OFNR) 0 to 70°C (commercial)
40G QSFP+ Passive DAC ≤0.5W 40Gbps 30AWG PVC (OFNR) 0 to 70°C (commercial)
QDD200-8S28PC01 Passive DAC ≤0.5W 200Gbps 30AWG PVC (OFNR) 0 to 70°C (commercial)
200G QSFP56 to 2x100G QSFP56 DAC ≤0.5W 200Gbps 30AWG PVC (OFNR) 0 to 70°C (commercial)
 

Cat5e & Cat6 & Cat6a LSZH Ethernet Network Patch Cable

FS newly launched Cat5e, Cat6 and Cat6a UTP patch cables support current and future category 5e/5/6/6a applications. Among them, Cat5e patch cables are mainly used in Voice/Video/VoIP systems in LAN, while Cat6 and Cat6a are used in patch panel or equipment connections in enterprise networks and data centers.

We'll be back next month with another update. Have a great month.

You might be interested in

Knowledge
Knowledge
Knowledge
See profile for Sheldon.
Sheldon
Decoding OLT, ONU, ONT, and ODN in PON Network
Mar 14, 2023
376.7k
Knowledge
See profile for Irving.
Irving
What's the Difference? Hub vs Switch vs Router
Dec 17, 2021
363.7k
Knowledge
See profile for Sheldon.
Sheldon
What Is SFP Port of Gigabit Switch?
Jan 6, 2023
326.7k
Knowledge
See profile for Migelle.
Migelle
PoE vs PoE+ vs PoE++ Switch: How to Choose?
Mar 16, 2023
414.7k
Knowledge
Knowledge
Knowledge
Knowledge
See profile for Moris.
Moris
How Much Do You Know About Power Cord Types?
Sep 29, 2021
286.7k